Couple of problems

[brucesim2003]

Hi guys,

I'm experiencing a few issues that I have not seen reported here, but maybe someone has a few ideas:

1/ I cant input any values on the "build infrastructure" screen - I put an ammount of RP's to spend, but the field instantly goes blank and none are spent. this happend if i clear the 2ic's suggestions or leave them

2/ After building a new scenario, some ports i have removed are still on the map, but are inactive - sometimes when I have swapped the side of the port it still is in the colour of the original side.

3/ Related to 2/ - sometimes ports are active but not showing on the map - pop-up info tells me they are there though.

As i said, does anyone have ideas...i.e. am I doing something wrong?

Cheers


Bruce

[DiFool6]

Use the keyboard numerals, not the ones on the keypad. Dunno why the keypad "wipes" away your numbers (at first I thought I didn't have the resource points to spend at all).

[brucesim2003]

Use the keyboard numerals, not the ones on the keypad. Dunno why the keypad "wipes" away your numbers (at first I thought I didn't have the resource points to spend at all).


Aye, it works.:) Problem 1 solved. Ta muchly

Cheers


Bruce

[brucesim2003]

Anyone have any ideas about 2 and 3 in my op?

Cheers


Bruce

[Warship NWS]

To Brucesim, I forwarded your inquiries to Tony and Scott for assistance, expect a reply shortly. Thanks.

[tony_glazebrook]

Hi guys,

I'm experiencing a few issues that I have not seen reported here, but maybe someone has a few ideas:

1/ I cant input any values on the "build infrastructure" screen - I put an ammount of RP's to spend, but the field instantly goes blank and none are spent. this happend if i clear the 2ic's suggestions or leave them

2/ After building a new scenario, some ports i have removed are still on the map, but are inactive - sometimes when I have swapped the side of the port it still is in the colour of the original side.

3/ Related to 2/ - sometimes ports are active but not showing on the map - pop-up info tells me they are there though.

As i said, does anyone have ideas...i.e. am I doing something wrong?

Cheers


Bruce

Bruce - It would help if you could send me the three files for the scenario you created:

- the campaign file in the GameData\Campaigns folder. The file starts with the name you gave it
- the two player files in the GameData\LatestPlayerFiles folder. Each file also starts with the name of the campaign.

And also include a note there or here saying which ports were not displaying correctly.

[brucesim2003]

Ok, I've got the files. Where do I send them?
Cheers


Bruce

[brucesim2003]

just a bump

[William Miller]

Brucesim,

You can zip and email the files to me and I will fwd them to Tony. My email address for this purpose is:

miller7538(AT)sbcglobal.net

(Replace the (AT) part with the @ symbol please...)

[tony_glazebrook]

Brucesim,

You can zip and email the files to me and I will fwd them to Tony. My email address for this purpose is:

miller7538(AT)sbcglobal.net

(Replace the (AT) part with the @ symbol please...)

Just confirming I have received the files and will look at them asap, after I finish R1.03 (which is almost done).